Lee Sound Design, Atlanta, GA

Lee Sound Design was responsible for complete project consultation, acoustical design, infra-structure design and construction administration of this 2000 square foot professional recording studio. Spaces include an 825 square foot large main room, auxiliary room, isolation booth and pseudo LEDE® control room. Noise control design includes dual, multi-leave walls, hardwood floating floors, isolation hanger suspended ceilings, rated acoustical doors and windows. Interior acoustical design includes RPG Diffractals® on all studio walls, including a custom mid/low frequency system on one wall, wood and plexiglass QRD®s were used on the splayed control room side walls, FRG Omniffusors ^TM were installed flush in the rear walls of the control room and also suspended in the ceiling grid of the Studio and Aux room, Modex Modules were installed in all rooms, Corner Modex™ were used as a moveable panel in the Studio and BAD ^TM Diffsorptive panels were installed in lower walls and ceiling grids. Noise Criteria, room decay, spatial absorption and LF room modes were predicted and calculated prior to construction. After construction these parameters were measured and verified using primarily the TEF Analyzer. All RPG products performed as expected and the final result met all expectations and was enthusiastically received by the client.