Standard
Unit Construction
- 2' height x 2' width nominal (1' 11-5/8'' x 1' 11-5/8'') x 4'' deep (at max.)
- 4’ height x 2’ width nominal (3’ 11-1/4” x 1’ 11-5/8”) x 4” deep (at max.)
- Guilford of Maine FR701 Fabric
- 6 lb. density fiberglass
- RPG Binary Amplitude Diffsorbor™ Template
- Square edges
Product Options*, **
Fabric Selection
- Any acoustically transparent fabric approved by RPG Diffusor Systems, Inc.
Unit Size
- Minimum size of units is 2' height x 2' width nominal (1' 11-5/8'' x 1' 11-5/8'') x 4'' deep (at max.)
- Units can be made with any height up to 8'
- Units can be made with any width up to 4'
- Units can be made with depths up to 8”
Edge Conditions
- Units can be made with square edges only.
Note: All dimensions are allowed a tolerance of ± 1/16" due
to material shrinkage and variations.
*Most options merit an increase or, in some cases, a decrease in pricing compared to the standard unit.
**Due to
material availability, RPG® reserves the right to change options at
any time. Therefore, any special options—whether listed or not—must
be confirmed prior to submittal of P.O. and acceptance verified by RPG®
Diffusor Systems, Inc.
Option Sheet
|
| Copyright 2000, RPG Diffusor Systems, Inc. |