Standard Unit Construction
- 2' height x 2' width nominal (1' 11-5/8'' x 1' 11-5/8'') x 1'' deep
- Guilford of Maine FR701 #298 Fabric
- 6 lb. density fiberglass
- Binary Amplitude Diffsorbor™ Template
- Flat edges
-
Fabric Selection
- Any acoustically transparent fabric approved by RPG Diffusor Systems,
Inc.
Unit Size
- Minimum size of units is 24" x 16"
- Units can be made with any height up to 8'
- Units can be made with any width up to 4'
- Units can be made with depths between 1" and 6"
Edge Conditions
- Units can be made with flat, beveled, angled, or radius cut edges
Note: All dimensions are allowed a tolerance of ± 1/16" due to material shrinkage and variations.
*Most options merit an increase or, in some cases, a decrease in pricing compared to the standard unit.
**Due to material availability, RPG® reserves the right to change options at any time. Therefore, any special options—whether listed or not—must be confirmed prior to submittal of P.O. and acceptance verified by RPG® Diffusor Systems, Inc.
Option
Sheet
|
| Copyright 2000, RPG Diffusor Systems, Inc. |