Standard Unit Construction
- Constituent materials conforming to the following ASTM specifications:
1. Portland Cement: ASTM C-150
2. Blended Cements: ASTM C-595
3. Hydrated Lime, Type S: ASTM C-270+
4. Aggregate: ASTM C-331 or C-33, based on local availability
- Standard gray block aggregate color (actual color may vary)
- 12" deep block (dB12S and dB12NS):
7-5/8'' height x 15-5/8'' wide x 11-5/8" deep
- 8" deep block (dB8S and dB8NS):
7-5/8" height x 15-5/8" wide x 7-5/8" deep
- dB8S and dB12S units contain a fiberglass insert
-
Models
- dB12S: 12'' deep DiffusorBlox® with a resonator slot.
- dB12NS: 12'' deep DiffusorBlox® without a resonator slot.
- dB8S: 8'' deep DiffusorBlox® with a resonator slot.
- dB8NS: 8'' deep DiffusorBlox® without a resonator slot.
Color
- DiffusorBlox® can be produced in a wide variety of colors. Please
contact RPG® directly for more information.
Aggregate
- DiffusorBlox® can be produced in a wide variety of aggregates.
Please contact RPG® directly for more information.
Surface Texture
- The back surface of DiffusorBlox® can be ground or textured.
Please contact RPG® directly for more information.
Note: All dimensions are allowed a tolerance of ± 1/16" due to material shrinkage and variations.
*Most options merit an increase or, in some cases, a decrease in pricing compared to the standard unit.
**Due to material availability, RPG® reserves the right to change options at any time. Therefore, any special options—whether listed or not—must be confirmed prior to submittal of P.O. and acceptance verified by RPG® Diffusor Systems, Inc.
Option Sheet
|
|
Copyright
2000, RPG Diffusor Systems, Inc. |